BearingLoadCellPRECISION AT EVERY ROLLER END.Request a model-specific bearing load cell replacement assessment. Check bore, center height, force direction, electrical interface and installed calibration.
Search ABB, FMS, DFE or Montalvo. Preserve the exact suffix and nominal load; one family name can describe several installations.
19 original references found. Results identify documents to review; they do not certify a BearingLoadCell drop-in match.
Supply original outline drawing and plate stack. Body length, fastening pitch and center height are separate dimensions.
The 260 mm fixing dimension must not be entered as a verified overall body length. Upload the installed drawing by email.
Keep PFCL (vertical) distinct from PFTL (horizontal). Check height datum, locating features, fasteners and electronics.
Compare upper and lower hole patterns separately. Housing center height is not the sensor-block height.
| Installed sensor technology | What the original interface means | What the alternative review must resolve |
|---|---|---|
| ABB Pressductor | Magnetoelastic sensor with dedicated tension electronics. | New sensor pair, conditioning electronics, cable, signal scaling and commissioning. Do not wire a strain-gauge bridge into a presumed interchangeable Pressductor input. |
| FMS foil bridge | Review the exact mV/V sensitivity, bridge impedance, excitation and original suffix. | Input compatibility, polarity, tare, paired gain and the installed web-path calibration. |
| DFE / Montalvo semiconductor configurations | Output and bridge arrangement can differ from a conventional low-output full bridge. | Verify the actual excitation limit, individual/pair bridge configuration and conditioner input range. |
Request a quote with separate lines for the sensor pair, amplifier/controller, cable kit and calibration. Retaining the existing electronics is a review outcome, not an assumption.
See the A+B package and commissioning sequence →For other FMS PMGZ/RMGZ/CMGZ variants, Magpowr or HBM equipment, retain the exact model and submit the original drawing and electronics details for an individual review.
Mechanical interface approved. Electrical chain identified. Individual channels calibrated. Tare and wrap gain checked in the installed machine. Delivery and commercial terms agreed in the quotation.
No model family name, original certificate or similar-looking image establishes all five items.
Send your shaft, load and machine details. We review the mounting envelope, sensing direction and PLC interface before quoting.